Kohler K-2815-47 Guia de Instalação descarregar pdf (Página 4)

1. Preparation

Install the water supplies and drain piping according to the

roughing-in information.

Wall-Mount Bracket Installations

Install the lavatory according to the instructions packed with the

bracket.

Continue to the “Install the Lavatory” section.

Self-Rimming Installations

Determine the faucet centerline location. Consider the faucet and

handle escutcheon diameters, the length of the spout, and the

clearance between the spout and the lavatory rim.

Calculate the faucet centerline measurement by ﬁrst dividing the

escutcheon diameter by 2, and then add 1/4″ (6mm) to the result.

If necessary, round the calculation up to the nearest 1/16″ (2mm).

Carefully draw the calculated faucet centerline on the cut-out

template. Choose the most suitable location based upon the

following factors:

•

compliance with all local plumbing codes

•

minimum 2″ (5.1cm) distance from the water stream to the

lavatory rim edge. This is important to ensure adequate clearance

for hand washing

2" (5cm)

Min.

Backsplash

Locator Line

Faucet

Centerline

Countertop

Divide Escutcheon

Diameter in Half,

Then Add 1/4" (6mm)

Cut-Out

Template

2" (5cm)

Min.

1" (2.5cm) Min.

Clearance

1/4" (6mm)

Min.

1018374-2-A 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 27 28

Sem comentários

Kohler K-2815-47 Guia de Instalação Página 4