Kohler Electric Shower Manual do Utilizador descarregar pdf (Página 38)

38

7. Lift out the flow regulator assembly,

switch assembly and the heater tank

from the case.

8. Carefully separate the flow regulator

assembly from the switch assembly,

inlet connector and heater tank by

gently pulling apart.

9. Make a note of the positions of all the

wiring on top of the heater tank.

10. Remove the screw that holds the

green earth wire to the thermal trip.

13. Refit the components in reverse order.

Make sure that the electrical wires and

‘O’ seals are installed in the correct

positions.

Flow Regulator

Assembly

Switch

Assembly

Inlet

Connector

11. Ease the thermal trip away from the

heater tank.

Caution! Do not press printed disc

on the thermal trip as this will make

the component unserviceable.

12. Remove the screw that holds the two

blue wires to the top of the heater tank.

Green Earth

Wire

Blue Neutral

Wire

Heater

Tank

Thermal

Trip

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

Comentários a estes Manuais

Sem comentários